OP
OP
Pops
Guest
- Thread starter
- #31
Ford has a really great solution that can lock closed AND folds flat if they want some inspiration.
-
? Welcome! If you were registered on Cybertruckownersclub.com as of October 1, 2024 or earlier, you can simply login here with the same username and password as on Cybertruckownersclub.
If you wish, you can remove your account here.
Create Exceptional Cybertruck Accessories Together With BASENOR
- Thread starter BASENOR
- Start date
- Watchers 0
OP
OP
Jacob
Guest
- Thread starter
- #32
1) Antenna Mount. Made to attach to one of the accessory mounts? is there a place to run the coax through the outside body into the cabin?
2) Flag Holder. When going to the dunes that requires a flag and designed to utilize the L-track in the bed.
3) Silicone Wheel Guards. (you know, the ones we're supposed to remove before off roading) so you can catch them on something and they just flex out of the way instead of breaking or getting ripped off.
4) Wheel Tredges. Lug nut replacements that have a pointy, break away tire shredder for when people are trying to run you off of the road (think "Spy Hunter"). This could be very useful for the police force or diabolical villains alike. The name "Tredges" I made up and expect royalty compensation.
5) Jack Stun. Worried about getting car jacked or a road rage avenger? Simply pull over and arm your "Jack Stun". Jack Stun will charge your trucks body with high current and discharge it through the attackers body just like a stun gun. Simply drive away afterward (and call police (unless villain)).
This is a small example of some of the simple (and more exotic) ideas that I have for the Cybertruck. Please reach out to me as I have MANY more ideas that I'd like to share with someone that is willing to work with me on these things.
2) Flag Holder. When going to the dunes that requires a flag and designed to utilize the L-track in the bed.
3) Silicone Wheel Guards. (you know, the ones we're supposed to remove before off roading) so you can catch them on something and they just flex out of the way instead of breaking or getting ripped off.
4) Wheel Tredges. Lug nut replacements that have a pointy, break away tire shredder for when people are trying to run you off of the road (think "Spy Hunter"). This could be very useful for the police force or diabolical villains alike. The name "Tredges" I made up and expect royalty compensation.
5) Jack Stun. Worried about getting car jacked or a road rage avenger? Simply pull over and arm your "Jack Stun". Jack Stun will charge your trucks body with high current and discharge it through the attackers body just like a stun gun. Simply drive away afterward (and call police (unless villain)).
This is a small example of some of the simple (and more exotic) ideas that I have for the Cybertruck. Please reach out to me as I have MANY more ideas that I'd like to share with someone that is willing to work with me on these things.
OP
OP
GnarlyDudeLive
Guest
- Thread starter
- #33
1. Review Mirror that integrates into the systems existing rear camera. Let me set the zoom and position for the visibility I desire. Normal sized.
2. Small (form fitting) display that integrates with existing side view cameras and a speedo for directly behind the steering wheel.
2. Small (form fitting) display that integrates with existing side view cameras and a speedo for directly behind the steering wheel.
OP
OP
cyberville
Guest
- Thread starter
- #34
CyberLunch and CyberDinner trays (front & back) for on-the-go meals....which will be even easier once FSD is available ?
OP
OP
rudedawg78
Guest
- Thread starter
- #35
Under back seat storage system. Something like this:
OP
OP
Art138
Guest
- Thread starter
- #36
A vendor on this site is coming up with seat covers but is locked to only black with white trim. Many of us will be getting the grey decor. I am sure you will have many takers if you can come up with black covers with grey trim.
OP
OP
RayzorBEV
Guest
- Thread starter
- #37
OP
OP
Dusty
Guest
- Thread starter
- #38
Hey, I just sent direct message about something that could be fun collaboration for the holidays this year. I hope to hear back!
OP
OP
PaulConner
Guest
- Thread starter
- #39
Passenger ejector seats.
OP
OP
EMoeller
Guest
- Thread starter
- #40
The only seat covers now are for BOTH seats and I just want single seat covers. Would love to just by the Black/White one if it was driver side only.
OP
OP
EMoeller
Guest
- Thread starter
- #41
Can we get a swivel/tilt mount for the screen? Model 3's have those as aftermarket now.
OP
OP
Art138
Guest
- Thread starter
- #42
Interesting,do you have a pic of one?
OP
OP
Dmitrij
Guest
- Thread starter
- #43
I like the CT minimalism, and OEM accessories cover almost all my needs, although they are definitely overpriced. I’d like to have a built-in ramp as has been presented in 2019. However, I believe it’s only feasible for Tesla engineers and should come out in later CT versions.
OP
OP
TeslaKen
Guest
- Thread starter
- #44
Many of the items above are already available from other vendors but here are a few I'd like to see:
1) attachment for Escort 9500 radar detectors that fits where rearview mirror is located (there are other brands supported by some 3D prints out there, just not an Escort one that I've seen)
2) Sunshade that easily folds or rolls up (mentioned above)
3) If you remove your side mirrors, some cover plates to go over the hole left behind.
4) If you remove the side mirrors then what about a small screen in front of the steering wheel that shows the left and right wing cameras used for when you turn left or right?
5) Some sort of bed gate for when the tailgate is down and you have long items in the bed but don't want them going out the back.
6) A pivot device for the rear view camera, when the tailgate is down the camera pivots up so you can still use it to see out the back as opposed to the surface of the road below the tailgate.
7) Camera that shows the rear bed whether tonneau cover is open or closed.
8) Thin layer solar cells to be added to the tonneau cover then can roll up - wafer thin
9) Wheel aero covers similar to the original style that clip onto the wheels
10) L track with net for frunk since the Tesla one is perpetually out of stock
11) Screen for rear view mirror showing all the camera angles (others have requested, just adding it to my list as well)
12) Front bumper brush bar (tasteful, not too large or too heavy with a mount for the next item)
13) 48v wench that mounts to the item #12 above
14) Open and close tonneau cover during lightshows
15) Raise and lower air suspension during light shows
16) Stainless steel shell frunk cooler that taps into the power there to keep cool, would be like a mini fridge (this was mention previously as well)
17) Auto open doors on walk up like a Model X
18) Fake windshield wiper for passenger side that acts as an airfoil to guide the air over the truck on the passenger side as well. It wouldn't move but would provide balance visually and for airflow.
19) More carbon fiber interior and exterior options, if you see black plastic somewhere, offer it in carbon fiber, inside and out.
20) Cybertruck jack pads shaped like triangles, none of this circular garbage...
There you go, today's Top 20 list!
1) attachment for Escort 9500 radar detectors that fits where rearview mirror is located (there are other brands supported by some 3D prints out there, just not an Escort one that I've seen)
2) Sunshade that easily folds or rolls up (mentioned above)
3) If you remove your side mirrors, some cover plates to go over the hole left behind.
4) If you remove the side mirrors then what about a small screen in front of the steering wheel that shows the left and right wing cameras used for when you turn left or right?
5) Some sort of bed gate for when the tailgate is down and you have long items in the bed but don't want them going out the back.
6) A pivot device for the rear view camera, when the tailgate is down the camera pivots up so you can still use it to see out the back as opposed to the surface of the road below the tailgate.
7) Camera that shows the rear bed whether tonneau cover is open or closed.
8) Thin layer solar cells to be added to the tonneau cover then can roll up - wafer thin
9) Wheel aero covers similar to the original style that clip onto the wheels
10) L track with net for frunk since the Tesla one is perpetually out of stock
11) Screen for rear view mirror showing all the camera angles (others have requested, just adding it to my list as well)
12) Front bumper brush bar (tasteful, not too large or too heavy with a mount for the next item)
13) 48v wench that mounts to the item #12 above
14) Open and close tonneau cover during lightshows
15) Raise and lower air suspension during light shows
16) Stainless steel shell frunk cooler that taps into the power there to keep cool, would be like a mini fridge (this was mention previously as well)
17) Auto open doors on walk up like a Model X
18) Fake windshield wiper for passenger side that acts as an airfoil to guide the air over the truck on the passenger side as well. It wouldn't move but would provide balance visually and for airflow.
19) More carbon fiber interior and exterior options, if you see black plastic somewhere, offer it in carbon fiber, inside and out.
20) Cybertruck jack pads shaped like triangles, none of this circular garbage...
There you go, today's Top 20 list!
OP
OP
Gvardaman
Guest
- Thread starter
- #45
- She is not going to like that. I bet you meant a winch.
Great ideas!
How about:
- A camping bed/cushion for the dashboard.
- A center console that would fit in front of the front row armrest/storage. Something that would fill in that space, maybe it”s need a door on the passenger side for complete access?
- Storage, drop down tray, etc. for back of front seats.
- A shade that fills in above the sun visors. Maybe this is a nearly opaque tinted sticker?
- As mentioned, a replacement rear view mirror that is a screen to display the rear view. Could be larger than stock. Should function as a mirror when tonneau is open.
_ I’d be interested in screens fitted inside, where I look now to side view mirrors, displaying the side views, so the ext. mirrors could go. (With a stainless plate to cover the holes that is the size of the lip the mirrors were mounted to for a more seamless replacement.
Ok, I’m out until I have a truck to actually look at, drive and ponder!